Yueyang Tongtu E-commerce Co., Ltd. is a supplier that offers the original Siemens 6AU1455-2AD00-0AA0 components. We have a large stock of spare parts for discontinued models, with extremely competitive prices and same-day delivery service! We supply a full range of Siemens CF cards, power modules, power modules, motor modules, reactors, filters, servo motors, cables, handwheels (handheld units), operation panels, operation keyboards, op screens, CNC motherboards, NCU, PCU, CCU, as well as various CNC parts. Please inquire immediately for prices!
|
Specification |
Details |
|
Origin |
Imported from Germany |
|
Power Supply Requirements |
24V DC (20.4~28.8V) |
|
Typical Current |
1.9A |
|
Power Consumption |
46W |
|
Installation Method |
Book-type, DIN rail installation |
|
Protection Level |
IP20 |
|
Standard Accessories |
Dual fan module + Battery module (including battery) |
|
Weight |
Approximately 7kg |
|
Dimensions (W × H × D) |
Approximately 200 × 125 × 50mm |
When the Siemens 6AU1455-2AD00-0AA0 is connected to a 24V DC standard power supply, it has a full hardware port inspection, confirming that the 6 DRIVE-CLiQ ports handshake normally and can recognize the S120 driver. The PROFINET/PROFIBUS communication connection is stable without packet loss. The DI/DO point sensing is sensitive without adhesion. Both the USB and Ethernet ports can be normally recognized and connected by Scout/TIA.
It can normally upload/download SIMOTION programs. The basic 12-axis axis control can be registered normally without fault codes. The motion cycle, electronic cam, and synchronous control run smoothly without drift.
The STO/SS1/SBC safety functions are triggered and reset normally. It can operate for a long time at room temperature (0-55℃) with load. The insulation resistance meets the standard, and the risk of electric leakage is eliminated.
1. Equipped with a high-performance motion control CPU, it has 371MB of RAM and 512KB of persistent memory; it also has built-in Flash that supports safe storage of programs and data in case of power failure.
2. The basic control axis count is 12, and it can be expanded to up to 256 axes for high-speed operation.
3. The interpolation accuracy of Siemens 6AU1455-2AD00-0AA0 can reach ±1nm. In terms of dynamic response, the position loop is ≥1kHz and the speed loop is ≥2kHz, and the minimum cycle time is ≤1ms.
4. It supports complex processes such as linear/arc/spiral interpolation, electronic gears/cam, shearing/straight cutting, synchronous following, tension control, etc.
5. It supports STO (Safe Torque Off, basic), SS1 (Safe Stop 1), and SBC (Safe Brake Control).
Tongtu suggests that since the compatible upgrade solution for the discontinued Siemens 6AU1455-2AD00-0AA0 is 6AU1455-2AD00-0AA1, it is recommended that you prepare 1 to 2 units for backup in your current operating system. You can obtain more information by consulting us.
Address
No. 324, Hubin Street, Nanhu New District, Yueyang City, Hunan Province, China
